Contact Cement, Latex Gel (CAP-95)

Key Features

• Bonds instantly - no clamping
• Oil and water-resistant
• Nonflammable
• No unpleasant odor
• Easy water cleanup
• Contributes to LEED^® certification
• Contributes toward NAHB National Green Building Standard™ certification of the structure

Recommended For:

bonding high-pressure plastic laminates to wood, canvas, metal, leather, plywood, hardboard, rubber, particleboard and other laminates. Also recommended for the following materials if both surfaces are first coated with this adhesive: wood, copper, aluminum, rubber, steel, soft vinyl, leather, fabric and canvas.

Available Sizes

• 1 Gal. can
• 1 Quart can

Coverage

• 1 Gal. can covers 200 to 300 sq. ft.
• 1 Quart can covers 50 to 60 sq. ft.

Max VOC

95 GPL

• Download MSDS Sheets
• Download Technical Data Sheets

You need Adobe Reader to view PDF files.
You can download it here for free if you don't have it.

 

Surface Preparation

Make sure that all surfaces being bonded are clean, dry, structurally sound and free of any dust, loose paint or previous finishes. Both contact cement and material being bonded should be kept at room temperature for 24 hours prior to use. Apply CAP-95 between 40° F (5° C) and 100° F (40° C).

Product Application

Stir product before use. Apply two liberal, even coats of cement to both surfaces to be bonded using a brush or roller. On plywood and extremely porous surfaces, additional coats may need to be applied after the first two have dried. Allow both surfaces to dry before bonding (20 to 30 minutes under normal temperature and humidity conditions). A uniform glossy appearance of adhesive upon drying indicates enough thickness. If bond is not completed within two hours and surface becomes too dry, recoat both surfaces and allow to dry again.

Note

Position coated surfaces carefully before contacting. NO SHIFTING IS POSSIBLE ONCE CONTACT IS MADE. Immediately apply firm pressure over the entire surface. Work from the center out towards the edges using a 3" wide rubber roller or a block of wood with a hammer or a mallet. Trimming and finishing can be started immediately after bonding.

Drying Time

Drying time is 20 to 30 minutes. Surfaces should be joined within 2 hours of application. Bonds instantly on contact.

Cleanup

Excess wet adhesive can be removed with soapy water. Dried adhesive can be cleaned up with mineral spirits.

Buy Online

Visit these online retailers for a selection of Liquid Nails products.

Price and item availability may vary.

	homedepot.com
	lowes.com